- Configure your VPN gateway to support:
- IPsec site-to-site tunnels
- Pre-shared key (PSK) authentication
- Static routing (dynamic routing is not supported)
- IKEv1 or IKEv2
- Configure your firewall and VPN gateway to allow IPsec traffic:
- Ports: UDP 500 and UDP 4500
- Use the information provided by QA Wolf to complete your VPN configuration:
- QA Wolf VPN gateway public IP address(es): Configure these as the remote IPsec peer
- Pre-shared key (PSK): Set as the tunnel authentication secret
- Assigned subnet: Add static routes to allow traffic to and from QA Wolf
Compatibility
- Fully supported: AWS Site-to-Site VPN, Google Cloud VPN, Azure VPN Gateway
- Supported with configuration: Cisco ASA, Palo Alto, FortiGate
- Not supported: Dynamic-routing-only VPNs (for example, BGP-only)
If your VPN solution is not listed as fully compatible, contact your QA Wolf engineering lead to confirm interoperability before setup.